There is a time coming in the near future where the very popular chlorofluorocarbon Freon will need to be replaced out of all cooling systems. It is used in refrigeration systems, air conditioners, and many other products were cold air is necessary. As a result of studies that were done on the ozone layer years ago, it was determined that CFCs were causing the major hole that was appearing in this layer. This was of great importance because it is ozone which protects the inhabitants of the earth from potentially lethal radiation. As a result of this, people have been gradually trying to find replacements for this very popular chlorofluorocarbon, also known as R-22. One of the best out there is called TDX 20 or Bluon. Here is a quick overview of why you should use this particular replacement for Freon, and how you can find a company that will help you with your HVAC-R system.
What You Should Know About HVAC-R Systems
Most people are aware of what an HVAC system is. This stands for heating ventilation and air conditioning units. These are a combination of a heater, and an air conditioner, typically used in single-family homes and buildings. When you have a thermostat in your house, you are able to adjust the temperature by simply moving the thermostat to a higher or lower temperature. When you move this higher, the heater will turn on. However, if it is hot outside, you will want to use the air conditioner, which means you will set the temperature at a much lower setting. When this occurs, the AC unit will be turned on. In order to blow cold air, it has to use a coolant of some sort. This is going to be compressed, changing it into a gas, and through the process with in that mechanism, you are able to get cold air. Essentially, it’s going to absorb all of the heat, and disperse it outside, and the cycle will happen again. Unfortunately, Freon, which has been used for decades as a primary coolant, is soon going to be outlawed. HVAC-R systems are basically the same as HVAC systems, with the exception that they have a refrigeration unit. These are very common in the industrial industry where they are keeping large quantities of materials at cooler temperatures. If you have any type of business where you are shipping items that must be kept either very cold or even frozen, you have one of these installed. Going back to the topic of Freon, it was determined through scientific research that it was causing significant problems.
Why Is Freon So Dangerous To Use?
The reason that Freon is dangerous is because it is a chlorofluorocarbon. Scientists were able to easily determine that this was causing the ozone layer to become depleted. When the chlorine molecule interacts with the ozone, which consists of three oxygen molecules, it actually causes them to break apart. As this occurs, the ozone will disperse, leaving a hole in this part of the upper atmosphere so that lethal doses of radiation can come in. Fortunately for those of us that live in populated areas, it was not so bad. It is because of the circulation of the atmosphere that the highest density of chlorofluorocarbons was circulating at the bottom of the earth. Therefore, it was primarily Antarctica that was receiving the potentially dangerous dosage of radiation from the sun. Once that was determined, they then began to look for what could be causing this, and that’s how they discovered that chlorofluorocarbons, especially Freon, was something very dangerous for us all. Of course, this does presuppose that the Freon is leaking out into the atmosphere, changing from a liquid to a gas. To eliminate this problem completely, they determined that the best solution was to eliminate the production of R-22 and replace it with a coolant that was much more safe.
What Is TDX 20?
TDX 20 is a brand-new type of coolant from Bluon that has been synthesized using certain chemicals. It is one of the more popular types of replacement coolants because of all of the benefits that it provides. First of all, it is not a chlorofluorocarbon which means it is not going to disperse the ozone layer if it were to leak into the atmosphere. Second, it is very energy efficient. According to studies, it can be up to 25% more efficient, which means that people that own HVAC-R systems are going to save a lot of money. Another reason that this is so popular is that it is virtually identical to Freon in its chemical consistency. This means that people that have existing refrigeration units will not have to do any modifications. There is also no oil change required which is quite common when using other types of R-22 replacements. It operates at much lower pressure, and also at lower temperatures, and can reduce the overall vibration of any unit that it is in. Essentially, it is very efficient, can add stability to any refrigeration unit, plus it is fully approved by the ASHRAE and EPA. With all of these benefits, it is clear why this is one of the top choices when replacing Freon today.
As you can see, TDX 20 is probably the best choice if you are looking to replace all of the R-22 that is in your refrigeration systems. Bluon is considered by many to be the most likely replacement coolant on the market today. It can be a little more expensive for some businesses simply because they have a large number of refrigeration units. However, the cost savings that you will have because of the lower energy consumption is going to make switching over to TDX 20 a very valid choice. If you have not had a chance to do this yet, you may want to contact an HVAC company right away. They will have experience at not only removing the Freon, but putting in its place the Bluon. If you happen to be purchasing new items to replace the refrigeration units that you own, you can request that this particular coolant be installed. It is going to be a decision that you will see as one of the most profitable ones you will ever make if you are in an industry where refrigeration units are part of your business.